#21417 - 11/01/04 11:05 AM
Re: Greddy turbo owners unite!
|
HondaImport99
Poster
Registered: 12/16/03
Posts: 264
Loc: Burlington, NJ
|
Hey there, I just bought a 2000 Si 2 weeks ago and am already looking to enter the boost world. My friend has a greddy/revhard kit for sale that includes the following:
Greddy TD04-19T turbocharger
Greddy cast manifold
oil lines
Hose clamps
Revhard downpipe
Greddy Air Intake
Revhard Intercooler (5in thick)
Intercooler piping
Greddy BOV
Turbonetics Wastegate
All necessary hardware, i.e. pipe insulation, heat shield, hoses
Vortech FMU
gauges
I dont plan on running anything more then 5-6 psi for a little as I want to save up so I can upgrade to a better FMU. My questions are, with everything listed, will I need anything else to get going? And when I do decide to upgrade (2-3 months), do you guys have any suggestions on what exactly I do ex. AEM EMS? What else would I need besides that? Also I realize I will need a new clutch if I am to get this kit, what are your suggestions there if Im only runnin 6psi max? And is it ok if I just use the flywheel that I have or does it have to get resurfaced? If it doesnt how long will it last? Well thats all, sorry for all the questions, Im just looking to get as much info from you guys as possible, cause I kno most of you know your shit when it comes to boostin
|
|
Top
|
|
|
|
|
#21418 - 11/15/04 06:54 PM
Re: Greddy turbo owners unite!
|
Maxime
Newbie
Registered: 11/15/04
Posts: 11
Loc: Montréal, QC
|
2000 Honda Civic SiR
GReddy manidold
GReddy TD05H-18G
Custom 2.5" downpipe
Custom 3" exhuast
Custom Intercooler
Stock OEM ITR clutch
RC 500cc injectors
Walbro 255lph fuel pump
MSD BTM
SMC+
Dynoed at 238whp & 160.4 ft-lbs @ 7psi.
Now running 9psi of boost.
Best time:
60': 2.164
1/8: 8.908
1/4: 13.626
mph: 106.621
_________________________
A.K.A.: Special K
2000 Honda Civic SiR
13.626 @ 106.621 mph
|
|
Top
|
|
|
|
|
#21419 - 11/24/04 04:50 PM
Re: Greddy turbo owners unite!
|
jspec16a
Newbie
Registered: 11/23/04
Posts: 7
Loc: Ca, USA
|
I recently just purchased the greddy turbo kit for my 00 si, however it did not come with any instructions. I have been searching all over the net and have had no luck. I tired turbocivicsi.com and it appears that the site is down. Anyway if anyone could help me out it would be greatly appreciated.
thanks, Brian
|
|
Top
|
|
|
|
|
#21420 - 11/24/04 11:15 PM
Re: Greddy turbo owners unite!
|
ShaneSestito
Jr Member
Registered: 08/08/03
Posts: 403
|
someone on here or honda-tech has the isntructions in a .pdf in thier signature. Put up a post on Honda-tech.com's got boost forum, and one in general on this site asking for anyone with the Greddy integra install .pdf. The 'teg and the civic are the same install.
|
|
Top
|
|
|
|
|
#21421 - 11/25/04 01:07 AM
Re: Greddy turbo owners unite!
|
jspec16a
Newbie
Registered: 11/23/04
Posts: 7
Loc: Ca, USA
|
Hey thanks alot man i found them.
|
|
Top
|
|
|
|
|
#21422 - 12/02/04 11:09 PM
Re: Greddy turbo owners unite!
|
vspecsir
Poster
Registered: 03/25/03
Posts: 266
Loc: 808 State
|
Anyone know if the SOHC greddy 15G downpipe has the same bolt pattern as the DOHC18G downpipe?? K-teller has custom 2.5" greddy downpipes for the 15G, and if the bolt pattern is the same i want to buy it. He said that some 18G users bought the downpipe, and never returned it so he assumed that it works for the 18G!! anyone know?
_________________________
00' Civic Si L'dat
|
|
Top
|
|
|
|
|
#21423 - 12/04/04 12:06 PM
Re: Greddy turbo owners unite!
|
ShaneSestito
Jr Member
Registered: 08/08/03
Posts: 403
|
http://www.honda-tech.com/zerothread?id=1074720
I was curious so i posted your question in a more tech type forum 
Dont get me for plagerism!
|
|
Top
|
|
|
|
|
#21425 - 12/24/04 09:20 AM
Re: Greddy turbo owners unite!
|
B16Civic93
Newbie
Registered: 05/02/04
Posts: 44
|
the question still really hasnt been answered about the greddy e-manage, does anyone run it? do you like it? i have a friend that runs it on his car and he seems to like it. also where did all of you buy your kits from?
_________________________
93 Civic Coupe
JDM B16A engine; minor bolt ons...
|
|
Top
|
|
|
|
|
#21427 - 01/13/05 06:37 PM
Re: Greddy turbo owners unite!
|
Eric Henley
Newbie
Registered: 01/13/05
Posts: 9
Loc: Hockessin, Delaware
|
greddy 19 t kit on my d16y8 lol!!!! just sold my kit not happy with the power i'm getting and now its time for a real engine (jdm b16) plan on getting the greddy kit boosting to 10 tuned ofcourse cna't wait!
|
|
Top
|
|
|
|
|
#21429 - 03/04/05 07:53 PM
Re: Greddy turbo owners unite!
|
7even
Jr Poster
Registered: 03/06/04
Posts: 136
Loc: London, Ontario
|
You need a BOV for any turbo system.
The only modification you need to make is the have the BOV flange welded on to the return piping that goes from the intercooler to the intake manifold.
|
|
Top
|
|
|
|
|
#21431 - 03/11/05 03:57 AM
Re: Greddy turbo owners unite!
|
JAMinCiViC
Post Master Sr
Registered: 02/25/00
Posts: 3918
Loc: San Diego, now Iwakuni, JAPAN
|
as for fuel.. I went with the walboro pump and an aem fpr...
I did upgrade from my greddy kit so if anyone is interested in it holla!!
_________________________
JORDAN - [EM1 Crew]  20% OFF @ KARMALOOP.COM -->USE REP CODE JL7116
|
|
Top
|
|
|
|
|
#21432 - 03/11/05 09:35 AM
Re: Greddy turbo owners unite!
|
B-16 Bomber
Jr Poster
Registered: 03/10/05
Posts: 105
Loc: maryland
|
my greddy kit is gettin on this weekend hope to hit the track next weekend...cant wait!! im gunna tune it to 8lbs on the emange hopefuly its not as bad as some say going for mid 13's we will see
|
|
Top
|
|
|
|
|
#21434 - 06/23/05 11:45 AM
Re: Greddy turbo owners unite!
|
6thgenvic
Newbie
Registered: 01/26/05
Posts: 22
Loc: Fort Worth, Texas
|
well im new to this but the 24v and the 31v intercoolers are size's and i dont know about the install of the turbo kit it self. ok now i have a question for the people that are running the greddy e-manage, is it safe to run my car on it, i have herd some bad things about it and didnt know if it was good or not. as we speak im in the prosses of putting the kit on my self and wanted to know if any of you have any advice that you may have abut the kit. thanks for the help
bobby
|
|
Top
|
|
|
|
|
#21435 - 06/23/05 11:54 AM
Re: Greddy turbo owners unite!
|
6thgenvic
Newbie
Registered: 01/26/05
Posts: 22
Loc: Fort Worth, Texas
|
hey i for got another question, what do you think is a safe boost range for a usdm B16?
|
|
Top
|
|
|
|
|
#21436 - 06/29/05 04:31 PM
Re: Greddy turbo owners unite!
|
slo96ex
Post Master
Registered: 08/09/03
Posts: 2583
Loc: Florida
|
1996 Civic EX, Greddy 92-95 Civic d-series kit, Type-S BOV, AFC hack, 5.5psi, untuned. 14.69@94.58mph on street tires.
|
|
Top
|
|
|
|
|
#21437 - 07/27/05 11:15 AM
Re: Greddy turbo owners unite!
|
jefferyt
Newbie
Registered: 04/26/05
Posts: 14
Loc: Indiana
|
want to get this kit just a few for you guys,
what fuel pump do i need??
how do you adjust the boost, or will it adjust itself once i put bov and i/c on??
the very most i want to boost at is 7-8 psi , will it be safe on stock internals??
what fuel management do i need to get that i dont' have to change from obd2???
thanks and sorry if these were answered before, but i didn't see anything on it.
|
|
Top
|
|
|
|
|
#21438 - 07/27/05 12:27 PM
Re: Greddy turbo owners unite!
|
SiAdam
Post Master Supreme
Registered: 07/22/01
Posts: 19264
Loc: West By God Virginia
|
Quote:
want to get this kit just a few for you guys,
what fuel pump do i need?? I would recommend the Walbro 255
how do you adjust the boost, or will it adjust itself once i put bov and i/c on?? Boost is set via the wastegate...to adjust you will need a boost controller
the very most i want to boost at is 7-8 psi , will it be safe on stock internals?? Yes, ASSUMING you have it tuned properly
what fuel management do i need to get that i dont' have to change from obd2??? None that are worthwhile. Changing to ObdI is very easy. Look into Hondata, Crome, Aem, etc.
thanks and sorry if these were answered before, but i didn't see anything on it.
Sidenote, if you are really interested, please do some reading to better your knowledge....
Here is a good start....
http://forums.clubsi.com/showflat.php?Cat=0&Number=5635036&an=0&page=0
_________________________
05 Berlina Black S2000 700whp / 500wtq
Built, not bought.
|
|
Top
|
|
|
|
|
#21439 - 07/27/05 02:12 PM
Re: Greddy turbo owners unite!
|
jefferyt
Newbie
Registered: 04/26/05
Posts: 14
Loc: Indiana
|
thanks
|
|
Top
|
|
|
|
|
#21440 - 08/26/05 06:22 AM
Re: Greddy turbo owners unite!
|
B00stfed
Newbie
Registered: 08/26/05
Posts: 1
Loc: San Diego, CA
|
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTA1MDM3ODZzNDEzZGZkMzF5NTQx.jpg
I have a 1998 civic coupe w/b18c US-spec
Here's my set up:
AEM EMS
TD05-18G
31V FMIC & Type-s BOV
Walbro Fuel Pump 255lph
A.E.B.S T-Sleeves
J.E. Pistons 9.0.1
Eagle Rods
ARP Head bolts
R.C 440cc
Skunk2 Intake manifold
Apexi N1 3” Turbo back Exhaust No Cat
Nology Hot wires
Hyper ground wires
ACT Heavy Duty Clutch
327whp 233wtq at 14.2 psi on 91 octane
|
|
Top
|
|
|
|
|
#21441 - 08/28/05 01:15 AM
Re: Greddy turbo owners unite!
|
chemik
Newbie
Registered: 08/28/05
Posts: 2
Loc: Dallas,TX
|
02 Si
GReddy kit w/ Greddy FMIC
Walbro 255
RC 550s
Kpro
HKS SSQ
Megan Downpipe
252whp/243ftlbs 8.5psi
stock clutch 13.4@104 1.9 60' 15s BFGs @ 17psi front / 16s in the back
|
|
Top
|
|
|
|
|
#21442 - 08/30/05 12:38 AM
Re: Greddy turbo owners unite!
|
CuttingEdge
Newbie
Registered: 07/27/05
Posts: 50
Loc: SF Bay Area
|
damn. thats some impressive stuff
|
|
Top
|
|
|
|
|
#21443 - 10/08/05 06:11 AM
Re: Greddy turbo owners unite!
|
j.r.ortiz
Newbie
Registered: 07/01/05
Posts: 8
Loc: cedar park, tx
|
A few months ago, I brought my car to a local shop for a 100K tune-up plus installed an e-manage & CTR cams. Then he dyno tuned it and got 150/hp (cold air intake+4-2-1 header included, stock exhaust) I'm about to put an order in for a Greddy turbo kit, Greddy Evo 2 exhaust kit, and a test pipe (with O2 simulator) for my 99 si. But when I asked the guy at the shop if he was going to dyno tune it, he said it didn't need it at stock psi setting. Is this true?
Edited by j.r.ortiz (10/08/05 01:17 PM)
|
|
Top
|
|
|
|
|
#21444 - 10/08/05 03:48 PM
Re: Greddy turbo owners unite!
|
baellremoteuse
Member
Registered: 10/07/05
Posts: 840
Loc: Michigan :)
|
I think the faq covered fmu and piggyback operation. The blue box/emanage tat comes with it will run the car at stock boost.
it will be unreliable, not tuned properly, and slow as shit. i reccomend learning more and buying a proper turbo system.
_________________________
Be lamps unto yourselves. If you can not read do not post.
Lead by example *67, not with threats.
|
|
Top
|
|
|
|
|
#21445 - 10/28/05 12:50 AM
Re: Greddy turbo owners unite!
|
vspecsir
Poster
Registered: 03/25/03
Posts: 266
Loc: 808 State
|
B00stfed, those are some very nice numbers @ that given psi!!! what type of fuel management are you using?
_________________________
00' Civic Si L'dat
|
|
Top
|
|
|
|
|
#21446 - 11/09/05 12:03 PM
Re: Greddy turbo owners unite!
|
ksperformance
Newbie
Registered: 07/23/05
Posts: 3
Loc: indiana
|
i just tried updating the software in my emanage and it erased the map. does any one on here have it or know where to get it thanks kenny
|
|
Top
|
|
|
|
|
#21447 - 11/15/05 11:16 PM
Re: Greddy turbo owners unite!
|
LatinEM1
Newbie
Registered: 11/15/05
Posts: 5
Loc: AZ
|
Im getting a kit in a few days..does anybody know if the Type 24 intercooler will clear the 99-00 oem fog's?
|
|
Top
|
|
|
|
|
#21449 - 11/16/05 07:48 AM
Re: Greddy turbo owners unite!
|
LatinEM1
Newbie
Registered: 11/15/05
Posts: 5
Loc: AZ
|
|
|
Top
|
|
|
|
Moderator: M3Pilot or M3Driver, SiAdam, Professor Paki
|
|
2000.Honda.Civic.SiR - 
"Snack Pack's Good For Me!!!!"
90 EF8 | 02 EP3
