#8713954 - 07/03/16 06:50 PM
Re: I need a new tripod
[Re: Kierf]
|
2000CheetahStud
Post Master Supreme
Registered: 02/10/03
Posts: 49653
Loc: Cincinnati, OH
|
What kind of lenses do you usually have on your D7000? This is something to consider in regards to your tripod.
_________________________
2016 4Runner Trail Edition | 2000 Honda S2000
|
|
Top
|
|
|
|
|
#8713973 - 07/03/16 07:55 PM
Re: I need a new tripod
[Re: 2000CheetahStud]
|
Kierf
Post Master Supreme
Registered: 02/12/00
Posts: 45347
|
How flexible are you with your budget? I ask because for a little bit more, you'll be able to get a great head and legs that should last you a long while.
Light weight, cheap legs will either fall apart, not be big enough for what you need it for, come with a cheap head you'll have to replace anyways, or be too unstable during any kind of slight wind.
Something like these legs: https://www.manfrotto.us/190-go-aluminum-4-section-tripod-with-twist-locks-black-mt190goa4tb
with this head: https://www.manfrotto.us/manfrotto-mhxpr...iction-controls
will last you a long, long while. The only consideration are the legs, are they going to be tall enough? Those are a little bit lower than 5 feet.
The gear head is far superior than a ball head. They're easier to adjust and, depending on which ball head you compare it to, a whole lot more stable. I wish I knew that when I got my ball head. I didn't like it.
|
|
Top
|
|
|
|
|
#8714662 - 07/05/16 12:25 AM
Re: I need a new tripod
[Re: 2000CheetahStud]
|
tylerdurden
Post Master Supreme
Registered: 03/31/02
Posts: 25887
Loc: Shyea, like I'm telling you
|
Sunpak has some OK CF legs. I don't have any recs on a head, I like ball heads for general use though. I've had the same Kirk head for 15 years which makes its $400 price pretty reasonable overall.
|
|
Top
|
|
|
|
|
#8716562 - 07/06/16 07:27 PM
Re: I need a new tripod
[Re: 2000CheetahStud]
|
chef
Post Master Supreme
Registered: 04/27/00
Posts: 23758
Loc: The OC
|
I think sub $200, and small for travel, is going to be difficult to find something really stable and secure. I spent that for a Slik that's pretty hefty, and it's great for location/studio stuff but not for traveling. I bought an Induro BH0 and it's pretty solid, but I do wish I'd gone bigger. I guess, it comes down to acceptability. Where do you draw the line. I've got it good, there's a Samy's about 5 minutes from me, and Calumet was close when they were still around too, so I can try out a lot of different brands first hand. The BH0 for example, it settles just the tiniest bit when I lock it down, but when I've got the 105 macro mounted and everything is framed up just right and i slowly release the camera, and it dips a little more and the framing is no longer just right, well that's a pain in the ass. I don't know if it gets better than that though.... I really like the Induro legs though, with the twist locks. Not sure why I like those better than levers like Manfrotto, but I do. Though, the carbon Induro legs are pretty pricey when you start getting into the stouter stuff.
_________________________
Why choose mac? "Well, huh, might as, might as well ask why is a tree good? Why is the sunset good? Why are boobs good?" RRLSi "put that money into a new imac damn it. it's the bomb" jsmonet "This all fuckin' day. Feel the 900MB/sec of glory. It's like a digital money shot all over your face." RRLSi Order my photo prints (New files uploaded)
|
|
Top
|
|
|
|
Moderator: jsmonet, x, 2000SiRacer, Professor Paki
|
|
