Page 1 of 2 12>
Topic Options
#20919 - 04/03/02 09:22 AM B-Series Cam Guide
samkarp Offline
Post Master Sr


Registered: 02/11/00
Posts: 5807
Loc: Milwaukee WI
Honda OEM and Aftermarket B-Series VTEC Cam Shaft Chart:

Cams Measured at 1mm of lift:
Integra Type-R(Through 1999 Spec)
Int-240 dur. / 11.5mm lift
Exh-235 dur. / 10.5mm lift

Civic Type-R And Integra Type-R(Integra Type R 2000/01 Spec)
Int-243 dur. / 11.5mm lift
Exh-235 dur. / 10.5mm lift

Skunk2 Stage 1
Int-252 dur. / 11.5mm lift
Exh-249 dur. / 10.8mm lift

JUN Type 1
Int-265 dur. / 10.9mm lift
Exh-268 dur. / 10.0mm lift

Spoon Sports
Int-256 dur. / 11.5mm lift
Exh-245 dur. / 11.1mm lift

JUN Type 2
Int-267 dur. / 12.0mm lift
Exh-265 dur. / 10.9mm lift

Skunk2 Stage 2
Int-266 dur. / 12.3mm lift
Exh-262 dur. / 11.8mm lift

JUN Type 3
Int-265 dur. / 12.0mm lift
Exh-265 dur. / 11.5mm lift

Skunk2 Stage 3
Int-270 dur. / 12.8mm lift
Exh-279 dur. / 11.8mm lift
________________________________________________________________________
Cams Measured with 0mm of lift:
Civic Si(1999 Spec)
Int-265 dur. / 10.5mm lift
Exh-267 dur. / 9.6mm lift

Integra GS-R
Int-274 dur. / 10.7mm lift
Exh-276 dur. / 9.6mm lift

Crower 400
Int-279 dur. / 10.7mm lift
Exh-280 dur. / 9.6mm lift

Civic Type-R And Integra Type-R(Integra Type R 2000/01 Spec)
Int-278 dur. / 11.5mm lift
Exh-280 dur. / 10.5mm lift

Crower 401(NA Version)
Int-282 dur. / 11.3mm lift
Exh-277 dur. / 10.5mm lift

Crower 401-T(Forced Induction Version)
Int-280 dur. / 11.8mm lift
Exh-276 dur. / 11.3mm lift

Toda Spec A
Int-290 dur. / 11.6mm lift
Exh-280 dur. / 11.2mm lift

Crower 402(Both Regular 402 and 402-A, 402-A is milder off VTEC)
Int-297 dur. / 11.8mm lift
Exh-287 dur. / 11.8mm lift

Toda Spec B
Int-295 dur. / 12.0mm lift
Exh-285 dur. / 12.0mm lift

Crower 403
Int-295 dur. / 12.0mm lift
Exh-293 dur. / 11.8mm lift

Toda Spec C
Int-295 dur. / 12.5mm lift
Exh-295 dur. / 12.5mm lift
________________________________________________________________________

Sam’s Rank from "Mildest to Wildest"(not Including Crower 401 Turbo and Crower 402-A):
Civic Si
Integra GS-R
Crower 400
Integra/Civic Type-R
Crower 401
Skunk2 Stage 1
JUN Type 1
Toda Spec A
Spoon Sports
JUN Type 2
Crower 402
Skunk2 Stage 2
Toda Spec B
JUN Type 3
Crower 403
Skunk2 Stage 3
Toda Spec C

Sources and Thanks:
[url=www.crower.com]www.crower.com[/url] for OEM and Crower Cams
[url=www.todaracing.com]www.todaracing.com[/url] for Toda Cams
Shawn at [url=www.Sound-Buys.com]www.Sound-Buys.com[/url] for Spoon Sports and Skunk2 Cams
Dave at [url=www.Darksol.com]www.Darksol.com[/url] for JUN and OEM cams

-To anyone posting this on a website or message forum; Please let the author be of this chart(Sam Karp, karpsam@hotmail.com) be know for any corrections or errors. The above rank list is determined via differences between all of the aftermarket cams compared to Civic Type R cams. Ties in the rank list are broken by taking the cam that has proven more peak power as the "better" cam.



-If anyone wants this e-mailed please post up or PM me. If anyone has a problem with the rankings/specs......go poop yourselves...I spent a lot of time on this...haha J/K...let me know your thoughts.
_________________________
~Sam Karp~
SCCA-Milwaukee
"Autocrossers always make good road racers, but road racers do not always make good autocrossers."-T.C. Kline

Top
Videos
#20920 - 04/02/02 05:00 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
MadtownSi Offline
Moderator


Registered: 02/03/00
Posts: 4521
Loc: Madison,WI
Thanks Sam!!!

[printing]
_________________________
--------------------------------- F1 www.donandmikewebsite.com

Top
#20921 - 04/02/02 05:10 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
SIMPLE4012 Offline
Post Master Jr


Registered: 03/17/00
Posts: 1975
Loc: LAKE GROVE, NY, SUFFOLK
Makes ya wonder....

If ya used a skunk2 stage 2 intake and and a JUN 3 exaust cam would it make more power. But also.....would it hit..?
_________________________
Former Hondata tuner and currently Joe Mama

Top
#20922 - 04/02/02 05:38 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
Runnin@Redline Jr Moderator Offline
Post Master Sr


Registered: 11/02/99
Posts: 9480
Loc: Midwest Eh?
i want sam's job, where i can get all this info instead of working now someone make this post sticky and keep it at the top, so when people has which cam is better, we point them here!
_________________________
Adam


Top
#20923 - 04/02/02 07:02 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
AZSnake Offline
Post Master Sr


Registered: 06/12/00
Posts: 6576
Loc: Phoenix, AZ
Thanks Sam, Im sure this is going to help out a lot!
_________________________


Top
#20924 - 04/02/02 10:29 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
sleeper4dr Offline
Member


Registered: 06/13/00
Posts: 781
Loc: Texas
very nice job! props sam!
_________________________
______________________________ '89 civic 4dr ls/vtec Extended Engine Details

Top
#20925 - 04/02/02 11:09 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
CSPCRX Offline
Jr Member


Registered: 08/09/01
Posts: 390
Loc: Peoria, AZ. USA
Sam,
Thanks, I just started shopping for cams and was not sure which to go with for the cash. Crowers sound like they might be the best bang for the buck.
_________________________
Vic
86 CRX SI (B16 Powered)
(SM2 Solo2, HPDE-3 NASA & TA-C Time Attack)
13.627 @ 98.36
03 Protege5
07 Harley FXST

Top
#20926 - 04/02/02 11:26 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
b20bastard Offline
Post Master Sr


Registered: 04/08/01
Posts: 3696
Loc: tempe
thanks, nice info. maybe we should make this post sticky for all the newbis
_________________________

Top
#20927 - 04/02/02 11:52 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
chef Offline
Post Master Supreme


Registered: 04/27/00
Posts: 23758
Loc: The OC
thanks, i'll archive it in my 'car stuff' folder.
_________________________
Why choose mac? "Well, huh, might as, might as well ask why is a tree good? Why is the sunset good? Why are boobs good?" RRLSi
"put that money into a new imac damn it. it's the bomb" jsmonet
"This all fuckin' day. Feel the 900MB/sec of glory. It's like a digital money shot all over your face." RRLSi
Order my photo prints (New files uploaded)

Top
#20928 - 04/03/02 07:52 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
NAspirated Offline
Jr Member


Registered: 02/13/02
Posts: 538
Loc: NYC
crower sucks when it comes to cams...mine cracked in my old set up:(

oh SAM thanks meng, you the man!
_________________________
B20...."My Addiction" are You thirsty for a glass of B²0

Top
#20929 - 04/03/02 08:18 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
e6b Offline
Newbie


Registered: 03/13/02
Posts: 57
Loc: Manila. Philippines
Thanks Sam! You the man!!!
Top
#20930 - 04/03/02 09:22 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
samkarp Offline
Post Master Sr


Registered: 02/11/00
Posts: 5807
Loc: Milwaukee WI
No problem guys.

The biggest thing I learned is what different cam company likes best....lift or duration. JUN is by far a duration company. They have much more duration than others on the list but hella less lift. Good for people running high dome pistons but adding lift really helps more IMO.

As for mixing/matching cams. I wouldnt do it. Maybe a JUN II Intake/JUN III Exhaust but still yet they are made to work together as a set. If there was duration/lift/power to gain by mixing and matching then they would do it themselves.

Another thing I learned.....I was really underestimating the JUN II cam. That is a hell of a cam that almost no one uses(Joey does I think). It is closer to JUN III than I thought it would be. Probaly just a little less power over 8200rpms but mainly thats it!
_________________________
~Sam Karp~
SCCA-Milwaukee
"Autocrossers always make good road racers, but road racers do not always make good autocrossers."-T.C. Kline

Top
#20931 - 04/03/02 10:02 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
DAY1Si Offline
Post Master


Registered: 07/13/00
Posts: 2690
Loc: Kansas City
Good deal!!
Gracias.
_________________________
Jp

Top
#20932 - 04/03/02 02:17 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
cruzersi99 Offline
Post Master


Registered: 11/13/99
Posts: 2513
Didn't Mike K run a JunII/ITR Exhaust cam combo and make good power?

_________________________
186 whp - Church Automotive (Dynapack)
189 whp - Zero Factory (Bosch)

Top
#20933 - 04/04/02 09:18 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
shivers Offline
Sr Member


Registered: 03/13/02
Posts: 1084
Loc: North America
In reply to:

Didn't Mike K run a JunII/ITR Exhaust cam combo and make good power?




Yes he did. You may be able to find the post on Honda Tech. I think I've got the link saved somewhere, I'll see if I can find it.

http://www.honda-tech.com/zerothread?id=90743

EDIT: added link to cam test results

Tony


Edited by shivers (04/04/02 10:47 AM)
_________________________
2010 G37s

Top
#20934 - 04/04/02 12:18 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
zc911 Offline
Ferrari4Sale 😎
Post Master Supreme


Registered: 01/01/00
Posts: 16451
Loc: toronto
that is awsome, thank you
_________________________
http://www.justaddgrease.com
all car stuff all the time

Top
#20935 - 04/04/02 03:53 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
brian spilner Offline
Jr Poster


Registered: 09/19/01
Posts: 110
Loc: tempe az
i didnt notice the monsterous auto 1st gen b16 bumpsitck on that list:D
_________________________
b16 this yo!

Top
#20936 - 04/05/02 12:25 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
CSPCRX Offline
Jr Member


Registered: 08/09/01
Posts: 390
Loc: Peoria, AZ. USA
So the Crowers are no good. Well then I guess its JUN3 cams for me. But I have heard of people having problems with the JUN 3s binding the valve springs even the JUN springs. Anyone have any feedback on this. Fact or Fiction? I have a B16A1 and i want to get the most out of it without taking the motor down completely. I have been told the JUN3 will give the most HP.
_________________________
Vic
86 CRX SI (B16 Powered)
(SM2 Solo2, HPDE-3 NASA & TA-C Time Attack)
13.627 @ 98.36
03 Protege5
07 Harley FXST

Top
#20937 - 04/05/02 04:23 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
SIMPLE4012 Offline
Post Master Jr


Registered: 03/17/00
Posts: 1975
Loc: LAKE GROVE, NY, SUFFOLK
fiction........I have never heard of this in a JUN setup.....

The cams beaking however is not unheard of...But onyl when abused and taken where they shouldnt be. They become very unreliabele at around 9700 or so. But then againnnnwho cares about 9700?
_________________________
Former Hondata tuner and currently Joe Mama

Top
#20938 - 04/06/02 04:22 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
Spoon1 Offline
Jr Member


Registered: 08/05/01
Posts: 532
Loc: L.A ,C.A .USA
thanks Sam!!!!!
Top
#20939 - 04/09/02 11:48 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
Team00SiRedline Offline
Member


Registered: 01/06/01
Posts: 908
does any1 here have the skunk2 stage1 cams??? i like to go with that....... any problems with it?? hows the power gains?
_________________________
2000 Civic Si EBP FS 17" Enkie NT03's w/ 205/40 Toyo T1S.. ...VAFC $240.....pm me

Top
#20940 - 04/13/02 03:21 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
JSIR Offline
Post Master Sr


Registered: 11/06/99
Posts: 6411
Loc: London, Ontario, Canada
nice compilation Sammy ! , if you hear of Jun cams or most other cams causing binding of the springs, it is almost always an installation error, where improper installed height was used or not checked. Sometimes the wrong springs are used with the wrong cams, but usually it is a problem with the installed height.
_________________________





02 S2000- Summer toy
12 Ford Explorer - Daily driver/Winter ride

Top
#20941 - 04/13/02 05:05 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
SiBirdie Offline
Jr Member


Registered: 03/29/01
Posts: 547
Loc: So cali
im just curious, have anyone dyno skunk stage 1 vs ctr/itr cams? Do both of them make good mid range power? To me from looking at the specs, it seem like skunk stage 1 will make more power since it has more lift and dur. ? What you guy's think ? dyno polts will be excellent thank you!
Top
#20942 - 04/18/02 01:59 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
SIINSI Offline
Post Master Sr


Registered: 03/30/01
Posts: 4463
Loc: Port St. Lucie, FL
Jun rules.

That is all.



Miguel
_________________________
2002 Torch Red - Z06 12.0@118

Top
#20943 - 04/18/02 09:57 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
Beave0101 Offline
servant of egosgame


Registered: 02/13/02
Posts: 15941
Loc: San Diego
Thanks Sam...No venom cams?
Top
#20944 - 04/20/02 10:41 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
dohc_b16a2 Offline
Newbie


Registered: 03/29/02
Posts: 32
Anyone know if the Skunk2 Stage 3 cams will have the same problems I've heard the Skunk2 Stage 2 cams have had? I'm talking about the lobes on the shafts wearing out after a while...btw make this post sticky!
_________________________
'00 FBP Si

Top
#20945 - 04/22/02 05:19 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
Whooopasss Offline
Post Master


Registered: 01/26/00
Posts: 2126
Loc: Somewhere else
Damn!! I love this page... thanks Sam!!
_________________________
2000 Civic Si traded
2001 S2000 traded
2002 Civic Si traded

Current
2003 EVO
2006 S2000
2006 350Z
2002 WRX

Top
#20946 - 04/23/02 09:06 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
samkarp Offline
Post Master Sr


Registered: 02/11/00
Posts: 5807
Loc: Milwaukee WI
This page is a sticky at the time.

I have not heard of any problems with the "new batches" of Skunk2 cams. Skunk2 admits that there were wear problems a few years back with their cam but I have not heard of anyone having a wear or breakage problem ever since the "new batch" came out. Atleast I have'nt heard about it here.
_________________________
~Sam Karp~
SCCA-Milwaukee
"Autocrossers always make good road racers, but road racers do not always make good autocrossers."-T.C. Kline

Top
#20947 - 04/26/02 02:56 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
DeeC Offline
Newbie


Registered: 04/18/02
Posts: 30
Loc: Wpg., Canada
My two cents:

1. Kick ass research. Way to go!!

2. I'm sure that most of you will know this, but for those who don't.
Since the max flow through the intake ports is determined by the port geometry, adding lift will only help till the port flow is maxed out. After that any extra lift won't help(unless turboed). Whereas adding duration will always increase the amount of intake charge flowing into the cylinder, regardless if the port flow is at its max.

Just something to consider for those without head work.
_________________________
DeeC

Top
#20948 - 05/05/02 02:45 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
b20crex Offline
Newbie


Registered: 12/07/01
Posts: 45
Loc: clinton mi usa
the people that break cams are the ones who dont have a clue were the valves need to be lashed at or what spring to run not knowing that info will result in binding for sure.to much spring pressure.
Top
#20949 - 05/06/02 06:10 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
tegmandan Offline
Newbie


Registered: 02/16/02
Posts: 39
Loc: Cleveland Ga, USA
which cams would be good to use in my ls/vtec engine. I have the stock 1st gen b16a cams and the vtec engagement is very mild, in sound that is anyways.

I was thinking of just changing the intake cam but I want to find one that will "POP" the loudest when VTEC engages.what makes the "POP" louder lift or duration?

please help me. thanks, Daniel
_________________________
94 teg gsr

Top
#20950 - 05/07/02 09:08 AM Re: Another One of Sams Super-Duper Guides.....Cams!!!
samkarp Offline
Post Master Sr


Registered: 02/11/00
Posts: 5807
Loc: Milwaukee WI
OMG.

You dont want pop...or a noticeable transition. You want a nice smooth transition when you hardly know that VTEC.

Unless you want to just have your car sound good and not have it make power.

Look at the post below this one for LSVTEC advice.
_________________________
~Sam Karp~
SCCA-Milwaukee
"Autocrossers always make good road racers, but road racers do not always make good autocrossers."-T.C. Kline

Top
#20951 - 05/24/02 08:08 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
visi0n Offline
Newbie


Registered: 04/13/02
Posts: 2
skunk2.com has a dyno chart of the stage1's vs ITR's not sure how accurate the information is though.
Top
#20952 - 06/17/02 04:00 PM Re: Another One of Sams Super-Duper Guides.....Cams!!!
SoFarSoFast Offline
Jr Member


Registered: 07/03/00
Posts: 690
Loc: Rolla, Mo, USA
I hardly visit this forum...but now ill keep coming back if I can get more info like this...I wish the rest of Csi was this well informed.

thanks sam

Top
#20953 - 06/18/02 11:55 AM Re: B-Series Cam Guide
samkarp Offline
Post Master Sr


Registered: 02/11/00
Posts: 5807
Loc: Milwaukee WI
OK, this post is back to nromal but still available for search.

If anyone needs this e-mailed I still have it.
_________________________
~Sam Karp~
SCCA-Milwaukee
"Autocrossers always make good road racers, but road racers do not always make good autocrossers."-T.C. Kline

Top
Page 1 of 2 12>


Moderator:  Runnin@Redline Jr, Dr. BrokenLimits, Professor Paki 
Hop to:
Shout Box

CSi Sponsors


ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors
Advertisement

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads